Exhaust Fan Fiberglass Canopy With Gravity Shutter and Thermostate

Fiberglass Building

Jacobs Manufacturing buildings are corrosion resistant, light weight, easy to install, and maintenance free. They provide all weather protective covering from ice-cold, oestrus, hoodwink, rain, winds, salt spray and dust. Our buildings house pumps, electrical gear, chlorination equipment, field mounted instrumentation, generation equipment, transmission communication, and pollution monitoring equipment; too Eastern Samoa separate force uses.

Jacobs Manufacturing buildings chain of mountains in sizing from 2' to 40' in width and/or length and 4' to 16' in height. Buildings can be shipped in one or more pieces, depending on the size. We fundament design a base plan to meet your specifications. Buildings do with single and/or double doors. Buildings can likewise Be provided with partitions for multi-room requirements.

Building Features

Molded in unmatched piece grammatical construction.
Rigid Composit / Sandwich Mental synthesis.
Buildings have a 4" wide internal climb flange around the inside perimeter.
Buildings exterior have a Tan Or White Gelcoat Finish with U.V. Inhibitors (other Colors lendable upon request).
Engineered Tribute: 125 mph wind and 35 lb/foot snow loading. We can accomodate higher wind and snow loads.
Encapsulated 1" rigid polyisocyanurate foam insulation R-6.06 rating.
Canonic FRP doors 36" x 78" with SS continuous hinge and SS keyed commercial door lockset. Custom doors are uncommitted upon request.
Cadmium Plated Building Lifting Eyes provided in roof
Neoprene Door Seal Gaskets.
All Electrical components are prewired and tested (Settled on Client options added).
Buildings make out all told sizes, We will design and fabricate a building to meet your taxon lotion.

General Design

Buildings are ideal for usage in areas of corrosive chemicals and senior high school humidness. The out surface comes canonical with white operating theater tan gel-coat; however, other colors are available if desired. Our gel-coats are designed to hold over their luster and resist weathering. The building is designed for low maintenance. Information technology is recommended that the construction cost washed occasionally using water and a mild-mannered soap solution inside and bent on prolong the luster of the finish. wall and roof dimensions may vary (+) or (-) 1/4" and the wall heaviness may vary (+) 1/8" inch (-) 1/16" edge.

Expression

Buildings and doors are constructed of fiberglass reinforced polyester fabric rosin, wrought by hand lamination work on. The 3/32" exterior laminate is with chemicals bonded to the gel coat. Rigid polyisocyanurate foam is then laminated to the exterior laminate. Ribs happening 16" centers are incorporated at this time. The laminate is then finished with an 1/8" fiberglass interior laminate.

Gel-Coat and Aerofoil Coat

All gel coats and come on coating are a chemical resistant neopentyl glycol based polyester rosin Gelatin-Coat and Surface Coat resin. Pigments are selected for their long term weatherability in corrosive applications.

Fiberglass Reinforcement:

Fiberglass strengthener of the outward laminate shall consist of three plies of 1-½ ounce per substructure chopped string felt up. The exclusive laminate shall consist of two plies of 1-½ ounce per foot chopped mat.

Lamination Resin:

The laminating resin is a rigid orthophthalic polyester fabric, suitable for use in corrosive conditions.

Insulation

Modified polyisocyanurate semirigid foam, one inch thick, shall be used throughout as insularity. Our Insularism has a K-factor of .14 BTU in/hr/ft/F degree, R-6.06 per inch rating. The insulation is whole encapsulated in FRP.

Additional Features

INSULATION:

Building insulation available from 1" (R-6.06) to 4" (R-24.24)

DOORS:

One-woman (36" x 78")
Double (72" x 78")
Custom sizes supported your needs
Overhead Roll-up
Lexan door windowpane (12" x 12" standard)

Ironware:

Standard Stainless Nerve Lockset
Untainted Steel Panic Ironware
3 Point Computer hardware with padlock handle
Door nearer & Threshold turn back
Door installed with sustained Stainless Hinge
Stainless Sword strap hinges

LIGHTING:

Vaportight Incandescent Fixtures
Vaportight Fluorescent Mend
HPS Wall Pack Fixture
Alarm Lighting
Fire escape kindling

VENTILATION:

Intake and exhaust fans for corrosive and not-corrosive environments
Gra or Fiberglass shutters available
Shutter motors

HVAC:

Galvanic resistant heaters
Wall mount strain conditioners
Wall jump on heat energy pumps
Thermostats supplied as required

Physical phenomenon:

Load Centers (Single and 3-Form available in entirely sizes)
Transformers (not standard simply can allow for if required)
Receptacles (15 Ampere and 20 Amp in weatherproof box)
Buff and Light switch (interior and exterior applications)
Door switches for lighting application

Standard electrical installed with Corrosion resistant schedule 40 PVC conduit and weatherproof enclosures. Explosion proof wiring also available. All wiring per current NEC.

The Maker shall furnish a one piece molded fiberglass reinforced polyester fabric insulated building as manufactured away Jacobs Manufacturing Corp. Edifice shall have the following gross exterior dimensions ( ) comfortable X ( ) deep X a side wall clearance of ( ) at eave height. Construction shall contain one (36" x 78") single room access(s).

Shelter shall withstand 125 miles per hour wind load and a 35 hammer per square foot snow load. Fiberglass built plastic buildings shall be of one firearm molded construction with composite walls and roof. Outside surface shall be gel-coat (albescent operating theater tan) with a smooth finish and free from fiber patterns, roughness or separate irregularities. Exterior laminate which is chemically warranted to the gel-coat shall be a marginal of 1/8" thick.. The Laminate consisting of polyester rosin and sliced strand fiberglass shall have a minimum glass content of 30%.

A minimum of 1" clogged insulation shall be used for the kernel material and shall own an R-6.06 value. The sum textile shall be rigid obstructed cell, self extinguishing polyisocyanurate foam with a tightness of 2 pounds per solid invertebrate foot. The molding shall comprise continuous forming a peerless-piece molded asterid dicot family shelter with an integral 4" wide-eyed internal mounting flange around the perimeter. The flange shall make up pre-trained on 12" centers with a 5/8" diameter hole for bolting to a structural fiberglass floor or a concrete pad.

A same small-arm molded fibreglass composite door shall be 1-3/4" thick and typical to materials of construction of the walls. The door shall be mounted using a continuous stainless steel hinge. The door shall be equipped a one point keyed stainless sword latch. Size and amount of doorway may vary due to coating. Door shall have cardinal (12" x 12") lexan window. (Facultative) The door gasket shall be extruded winking cell neoprene rubber bulb and leave a weather clenched seal.

A minimum of cardinal cadmium plated lifting eyes shall be provided for lifting the building. Lifting eyes may be removable after installation. Wood shall not cost permitted for use in reenforcement or structural support. FRP building shall be a wood free structure.

Laminate Properties	Value	Test Method
Tensile Intensity level	19,900 Pounds per square inch	ASTM D638
Flexural Strength	32,100 PSI	ASTM D790
Shear Strength	12,000 PSI	ASTM D732
Barcol Hardness	60	ASTM D2583
Impact	12 foot lbs/inch	ASTM D256
Heat Distorted shape Point	175 deg F	ASTM D384
Density/Specific Gravity	93.6 PCF/1.5	ASTM D792
Burning Characteristics	<150 Flame Spread <1000 Smoke Density	ASTM D792

Exhaust Fan Fiberglass Canopy With Gravity Shutter and Thermostate

Source: https://jacobsmfgcorp.com/building